Scope mounts

Cantilever 70 mm/2.76”
Color Black Hardcoat Anodized
Height 38 mm
Quick Release No
Rail/Type Picatinny
Tilt 0 MIL/MOA
Tube Diameter 34 mm

Article no.: SP-3022

Extended cantilever. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.

10-degree wedge included

0 MIL/0 MOA
Height: 38 mm/1.5”
Length: 140 mm/5.51”

The Condition One J-Arm allows a variety of accessories to be mounted directly to the Condition One Modular Mount (C.O.M.M.). The J-Arm can be mounted left or right, fore and aft, allowing the operator to determine the optimized location for their application. 45º, 1.70" Made from 7075-T6 aluminum, Type III Hard Coat Anodized Tan and Black.

The C1 12TOP DPP is designed to integrate integrate an Aimpoint Acro to the C1 ARC, giving the end user a 12 o'clock mounted Red Dot. Made from 6061 T6 Aluminum Type III Hardcoat Anodized Black. Weight .5oz.

Standard height (for 1.5" to 1.8" scope mounts):

Plate 1: Docter, Eotech, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
Plate 3: C-More, Vortex Razor, SIG Romeo 3
Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS
Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530
Plate 6: Aimpoint Acro
Plate 13: Holosun 509T
Plate 15: SIG Romeo 1 and Romeo 1 Pro
Plate 17: Picatinny Rail
Plate 18: Holosun 407K, 507K

Tall height (1.9" to 2.2" scope mounts):

Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530

MATERIALS: 7075-T6 Al + 4140H Steel FINISHES: Type III Anodizing + Black Nitride + Flash Nitride CENTER HEIGHT OVER RAIL 36mm (1.42") / CENTER HEIGHT OVER RAIL 40mm (1.57") WEIGHT: 81.5g (2.87oz) MADE IN USA: Lifetime Warranty Läs mer här: https://scalarworks.com/shop/optic-mounts/leap-aimpoint-magnifier-mount/

The Condition One Modular Mount is Badger Ordnance’s answer to a growing demand for modularity in optical platform mounting. With the ever-expanding options available to shooters in the accessory and electro-optic markets, Badger Ordnance saw the need for a mount that can make the most use of precious real estate on rifle platforms while acting as a centralized hub for attachments and not suffering from deflection seen on optics and lasers attached to handguards. The C1 Modular Mount offers the end user four accessory mounting points on the Unimount body both left, right, fore, and aft to suit a wide range of shooter’s needs. Unlike traditional ring cap accessories, the C1 accessories can be located in the same height and offset throughout various main mount heights giving the shooter a more consistent offset throughout models. This variant of C1 Modular Mount is 1.93” tall height for shooters who prefer a more heads up shooting position or to allow for clearance of lasers and attachments. The 1.93” tall height also aids in shooting passively through optics while wearing head borne night vision systems or gas masks. Made from 7075-T6 aluminum Type III Hard Coat Anodized. Weight 6.5oz.

Every Leap Mount is CNC milled from 7075-T6 billet, which has vastly superior mechanical properties to 6061-T6, and is used where ultimate strength and durability outweigh cost considerations.

The Condition One Micro Sight Mount allows the user to pair a Red Dot Sight with the C1 J-Arm giving the end user several different micro and macro adjustment points. For Micro adjustment points, the C1 Leupold DPP MSM has 2 different locations for a shooter to choose from on the plate itself (front or rear) and for Macro adjustments the C1 Modular Mount has 4 accessory ports left, right, fore and aft. This gives the user of the C1 Leupold DPP MSM 8 total positions to best suit their specific setup or application. Made From 6061-T6 aluminum Type III Hardcoat Anodized. Weight .4oz. Known optics using Leupold Delta Point Pro footprint: o Holosun 407 o Leupold Delta Point Pro o Etch EFLX o Shield RMS o Shield RMSc o Shield RMSw o Shield SMS

Lightweight Top Rail for MP5 and clones. Made from single billet of 7075 T651.

Height: 13 mm/0.51” (from top of receiver to top of rail)
Length: 125.0 mm/4.92”
Weight: 113 g/4 oz

Note: Current design includes a a lightening cut so that the serial number of the firearm can be seen with the top rail in place.

Zero Compromise Optics Cantilever Block Mount 36mm 0MIL H38 (400-0519) is a stable and precision-engineered mounting solution for 36mm rifle scopes on Picatinny rails. Designed for long-range and PRS setups. The 0 MIL base and 38 mm center height provide a neutral and reliable platform for modern high-performance optics.

The Badger Condition One 12 O'Clock Top Optical Platform is designed to integrate a Leupold Delta Point Pro at the 12 O'Clock position of the Condition One mounts, giving the user a top-mounted Red Dot.

Please note that the picture does NOT correspond to the real product.

The Schmeisser SM Quick-Detach Offset Mount is a sturdy quick-detach mount for rifle scopes with a 30 mm tube. Made of hard-anodized aluminum and designed for Picatinny and Weaver rails, it combines low weight with high durability and allows for quick, tool-free installation and removal.

The Schmeisser SM Quick-Detach Offset Mount is a sturdy quick-detach mount for rifle scopes with a 34 mm tube. Made of hard-anodized aluminum and designed for Picatinny and Weaver rails, it combines low weight with high durability and allows for quick, tool-free installation and removal.