Tools

Military grade thread locker. Eliminates screw and nuts loosening. Firm to the touch after about 2 to 10 minutes, final strength achieved after approximately 12 hours. Made in Germany.

The BEV Block is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver.

Pockets don't have infinite space, so making the most of it is key when designing for the EDC user. This is where the Zilch comes in: a lightweight folding knife built to slip into your pocket and out of mind. A slim footprint doesn't mean it's slim on design; it has exposed barrels, an unexpected spine design, and the option to customize deployment.

FAT Wrench. Momentskruvmejsel ink. 10 bit

Med FAT Wrench, Momentskruvmejsel drar du åt skruvarna korrekt vid monteringen av kikarsikten, lådskruvar, skenor och klackar tillexempel. Ett praktiskt hjälpmedel vid montering för att få rätt moment och justerbar mellan 10 till 65in/Ibs med 5 in/Ibs-stege.

Wheleers verktygsset med 30 stycken P-handtagsdelar levereras i ett ställ som kan skruvas på väggen eller stå på bordet/bänken.

The Dead Level levels your reticle in relation to the Earth taking out any margin of error of the reticle not being perfectly level with the scope body. Simply attach your scope to the Dead Level, level the device with the precision thumbscrews to center up the bulls-eye level, then just level the reticle with a predetermined level line or plumb bob. Made from Aluminum with Mil. Spec. Anodized Hard Coat Type III, crimson and black. Instructions included. FOR USE WITH MIL STD 1913 and NATO STANAG 4694 COMPLIANT RINGS AND MOUNTS

The Geissele Barrel Nut Wrench is designed to be used with Geissele Barrel Nuts and also with Mil Spec AR15/M4 Barrel nuts.

Perfekt för enklare arbeten på din AR, som tex byta gasrör mm Wheeler Master Roll Pin Punch Set för vapensmeder. Innehåller två set med dorn till sprintar med nio olika storlekar 5/16″, 1/4″, 7/32″, 3/16″, 5/32″, 1/8″, 3/32″, 5/64″ och 1/16 ″. Det ingår en liten nylon/mässinghammare, nylonytan är icke-skadlig och är utmärkt för uppriktning och andra användningar där en stålhammare inte är lämplig. Mässingsytan kan användas för att driva stift och stansar, såväl som en mängd andra användningsområden.

Features:
•Made of heat treated high grade blackened steel
•Containing tools for the following functions:
•Barrel nut
•Castle nut
•1/2”, 5/8” & 3/4” Muzzle device
•A2 Receiver extension
• Flat tip screw driver
•1911 barrel bushing
•Two ½” torque wrench ports
•Beverage opener
•Ergonomically fitted grip handle
•Marked for each tool function and its recommended torque designation

Specifications:
Length 33cm (13.0 in)
Width 6cm (2.4 in)
Height 1cm (0.4 in)
Weight 360g (12.7 oz)

The Geissele Suppressor Alignment Rod is a precision tool designed to ensure the suppressor is correctly aligned with the firearm's barrel.
Alignment checks include centerline alignment, perpendicularity of the barrel shoulder, and the alignment of muzzle device and suppressor mounting geometries.
Specifically made for AR .308 platforms, this rod has a 7.62mm diameter and measures 0.297" O.D. and is manufactured by GEISSELE AUTOMATICS LLC

Reaction Rod (7.62/.308)
The Reaction Rod (7.62/.308) makes the removal and installation of barrels, flash hiders, gas blocks and hand guards much easier and simpler. The Reaction Rod is designed to be gripped in a bench vise so that the rod is either horizontal or vertical. The upper receiver is then slid onto the rod and the rod’s integral splines enter the barrel extension and secure the barrel extension from turning. This allows all the torque from barrel nut wrenches to go directly into the barrel extension. In contrast, receiver vise blocks transmit the turning force into the aluminum receiver, a good part of which passes through the small, easily distorted receiver index pin. With the Geissele Reaction Rod, marring of an upper receiver’s finish by gripping and twisting inside vise blocks is eliminated and so is the need to remove sights and mounts from the receiver’s M1913 rail.

Matt svart DLC-beläggning på bladet med taktisk antireflex
Ythårdhet 72–75 HRC och hög korrosionsbeständighet
Smalt greppområde och strukturerat tumstöd på ryggen
Stabilt 102 mm långt blad i D2-stål
Lång skärpehållning och goda skärpegenskaper
G10-handtag med halkfri yta
Kydex sheath med bältesclip

Bladlängd: 102 mm
Bladmaterial: D2-högprestandastål
Handtagsmaterial: G10 med halkfri yta
Vikt: 0,270 kg
Finish: Stonewash
Ingår: Kydex sheath med bältesclip