Accessories

Protect your lens and minimize downrange reflection
Low profile in off position
Field repairable

Combining the technology of our ScopeCaps and HexCaps, the ScopeCap Pro features hexagonal lattice on the front lens when the cover is flipped up, which allows you to see through the optic with minimal obstruction while eliminating downrange reflections.

The Cap itself is a simple, rugged, and low-profile solution to protect your scope's lenses and eliminate any reflections from them when not in use. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.

Whether flipped up to take a shot or flipped down for ultimate signature reduction, the ScopeCap Pro combines all the features of products you've come to know and love from One Hundred Concepts.

AVAILABLE SIZES:

30mm
33mm (Vortex Razor HD/Viper 1-6x24)
34mm
36mm
39.5mm (Leupold Mk 5HD 2-10)
53mm
59mm
65mm
VCOG-6
VCOG-8

Spacer 39mm Micro w screws, Kit

Article no.: A-0055

Interface for attaching the Aimpoint ACRO C-1, C-2, P-1, and P-2 red dot sights to our Hunting Series rings and mounts and to our ISMS scope mounts. Includes screws.

Will also fit the Steiner MPS.

Weight: 20 g/0.7 oz

Intermediary interface for attaching any of our accessory interfaces or Picatinny rails at a 20-degree angle in relation to the side of an ISMS scope mount, SICS chassis, etc. Can be mounted for left-handed use.

Includes screws.

Weight: 33 g/1.2 oz

The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.

We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.

Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.

MATERIALS: 7075-T6 Al + 4140H Steel FINISHES: Type III Anodizing + Black Nitride + Flash Nitride CENTER HEIGHT OVER RAIL 36mm (1.42") / CENTER HEIGHT OVER RAIL 40mm (1.57") WEIGHT: 81.5g (2.87oz) MADE IN USA: Lifetime Warranty Läs mer här: https://scalarworks.com/shop/optic-mounts/leap-aimpoint-magnifier-mount/

Interface for attaching Aimpoint Micro red dot sight to the side of the ISMS scope mount (4:30 or 7:30-position). Consists of a separate Aimpoint Micro footprint and an A-0227 Angled Universal Interface. Fully reversible for lefthanded use.

The A-0228 is also suitable for:
• Aimpoint CompM5
• Actus Core-2 1x20
• Athlon Midas TSR2
• Blaser RD 17
• HoloSun HS403 and Paralow 403 (except the A model,) 503, 515, and 530
• MAKdot S 1x20
• Minox RV1
• Primary Arms Micro Dots
• SIG Romeo4 & Romeo5
• Vector Optics Maverick 1×22
• Vortex Crossfire


Includes screws.

Weight: 55 g/1.9 oz

Note: The Aimpoint Micro footprint (engraved A-0228) cannot be used without the A-0227 Angled Universal Interface (included).

Article no.: A-0010

Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.

The A-0010 footprint also matches the following, though screw sizing may vary:
• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T


Height: 9.5 mm/.374"
Weight: 21 g/0.7 oz

Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.

External Bubble Level Assembly designed to attach forward on the scope mount body or ring. Perfect solution for shooters who are unable to focus on the built-in level in the standard ISMS series or who has a model without a built-in level.

The angle of the assembly can be adjusted using two set screws. Includes screws.

Width: 29.5 mm/1.16”
Height: 41.6 mm/1.64”
Length: 32.1 mm/1.25”

Weight: 20 g/0.7 oz

Designed to fit your Zero Compromise Optic riflescope.

The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers. Most of our plates feature a patented stainless steel T-Nut which provide an industry leading six to seven threads of engagement. Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate. SPECIFICATION: Thickness: V4 MIL / LEO Plates are .095″ to .099″ thick Material: Plates are made from 6061 aluminum. All mounting hardware is Stainless Steel Finish: Plates are MIL-SPEC Type III Hard Anodized – Black Replaceable 416 Stainless Steel T-Posts for maximum thread engagement INCLUDED: Qty 1 – Optic Plate Qty 2 – 4-40 Plate Mounting Screws Qty 2 – 4-40 RMR Mounting Screws Qty 2 – 4-40 Holosun Screws Qty 2 – Patented 416 Stainless Steel T-Nuts Qty 1 – VC3 Thread Locker

Minimizes downrange reflection.
Snaps securely in place.

The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.

We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.

Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.
Compatible with Aimpoint Micro:

The LRA Send iT Electronic Level originated from a simple but powerful insight during a range day with friends: “Wouldn’t it be nice if we never had to take our eye off the target?” That spark led to a full year of design, testing, and iteration—resulting in the best electronic precision rifle leveling system on the market. Since its first release back in 2017, tens of thousands of shooters have felt the quiet confidence that comes from knowing their rifle is perfectly level—without breaking focus, losing time, or second-guessing the shot.

The MDT SEND IT GEN2 carries that mission forward with modern upgrades that matter: It’s nearly half the size of the original, more modular, more intuitive, and tougher than ever. It integrates seamlessly into your setup and delivers clear, glanceable LED feedback—precisely when you need it.

No more squinting at a sluggish bubble—Green Means Send it.

Transparent främre linsskydd med integrerad flip-up killFlash® ARD filter (Anti-Reflex Device) som skyddar från reflexer på linserna
Genomskinliga linsskydd behöver inte fällas upp - siktet är redo för användning direkt
Skydd och/eller ARD filter fälls lätt upp och förblir uppe tills de fälls ned igen
Håller linsen torr och ren
Skyddar linsen och minimerar risken för repor

The Infinity Cap is designed to offer end users reliable protection and enable full use of their Night Vision Devices. Built out of durable 6061 T6 Aluminum, the Infinity Cap is ready to take abuse. Securing to the NVG objective lens via threads, the Infinity Cap will not run the risk of popping off and an o-ring keeps debris out. The Infinity Cap features a polycarbonate sacrificial lens to keep your NVG objective lens from being scratched or damaged as well. Additionally, the Infinity Cap offers huge levels of focal adjustment with the patent-pending click-stop™ technology. With the turn of the Infinity Cap Turret, you can adjust the from 23.5mm down to 1mm with a click-stop™ at 5.66mm which puts you right at infinite focus. This crucial stopping point allows users to quickly shift their iris to infinity via tactile feedback, allowing users to easily identify what’s in front of them with full clarity. If lighting does not permit infinity focus, the user can gradually adjust open or open it all the way quickly if lighting conditions change rapidly. Our iris system gives you the perfect balance of adjustability and utility. Durable 6061 T6 Aluminum Housing Anodizing conforms to MIL-A-8625F Type II Class 1 and Class 2 Standard Securely mounts to the objective lens to avoid accidental removal Polycarbonate sacrificial lens for 92% light transmission O-ring for keeping debris out Adjustable Iris that goes from 1mm to 23.5mm Click-Stop™ technology allows you to quickly set the iris to infinity via a tactile “click” feedback Sacrificial lens holder can accept aftermarket accessories for pvs-14 style lens such as LIF or sacrificial lenses with an outside diameter not exceeding 32.4mm Compatibility DTNVG DTNVS DTAMS/STAMS THE-14 RNVG Compatible with PVS-14 styled optics like Carson or RPO Classics PVS-14 PVS-7 PVS-23 Argus Argus 1431 AB night vision RPNVG MOD3 BRAVO Low Light Innovations LLUL-21 Aeternus MH-1 TNVC BNVG-M ARTEMIS GSCI PVS-31C LUX-14.